| |
Air Cooling and Drying Systems
|
| |
 |
|
Simple, Efficient, Moisture Free Compressed Air
How It Works
Air enters the inlet port of the aftercooler from the compressor, traveling through, traveling through a series of copper tubes where air is cooled and moisture is released. The separator tank, complete with a drain, will remove 95% of the moisture released from the aftercooler. Air passes into the dryer through a desiccant bed which removes the remaining moisture from the air stream, bringing the dew point down to 20-30 degrees below ambient. The air exiting the top of the dryer should be clean, dry air. A sight glass is provided on the side of the desiccant tank for visual examination of the desiccant level.
Supplies Clean, Dry Air for up to Four 1/2" Blasting Nozzles |
|
Compressed air is hot which attracts moisture. The number one problem in abrasive blasting is water in blast system. With the AD1600 you will never have this problem again. The AD1600 removes that moisture which most likely contains oil and solid particles. Abrasive blasting requires dry compressed air. This portable, skid-mounted air drying system supports our abrasive blasting and recycling systems
This Model 1600 CFM Air Drying System has been Specifically Designed for Portable Abrasive Blasting Operations. |
|
1600 CFM Air Drying System
|
|
|
|
Eliminate the Problems of Moisture Laden Air Forever
|
| |
|
|
|
Technical Specifications: FSAD1600
|
|
Benefits
|
 |
|
Aftercooler
Fan is direct drive powered by compressed air - rated for 150 psi
Centrifugal Moisture Separator
Impingent style separator with low pressure drop at rated flows
Desiccant Dryer
3" Inlet and outlet ports and 20" diameter tank. Equipped with sight glass, drain valving and baffled air inlet.
Maximum Operating Capacity
1600CFM @ 150 psi
Desiccant Tank Capacity
1850 lbs., ASME Coded Pressure Vessel
Overall Dimensions
6' L x 6'6" W x 9' H |
|
 Affordably Priced
Improves Blasting Productivity & Quality
Eliminates Clogged Blast Hoses And Flash Rusting
Provides Moisture-Free Compressed Air
Supplies Clean, Dry Air For Up To Four 1/2" Blasting Nozzles |
| |
|
FSAES Air Cooler / Dryers
|
| |
 |
|
Four Cooler / Dryer Combinations to Enhance the Efficient Operations of Your AES Vacuum Blasting Machines
How It Works Air leaving a compressor is hot, moisture saturated and most likely contains oil and solid particles. AES Air Cooler/Dryer Units provide treatment of compressed air prior to its delivery to the Vacuum Blasting machine. The package comprises in-line; a coalescing filter for the removal of containments such as oil; and air cooler heat exchanger with an air driven fan; a water trap; a single-tower deliquescent dryer; and particulate filter.
Supplies Clean, Dry Air for up to Four 1/2" Blasting Nozzles |
|
Add a Cooler / Dryer to your Blasting Machine for Proper Performance
|
|
Air leaving a compressor is hot and moisture-saturated. Plus it most likely contains oil and solid particles. Clean, dry air is needed for the proper performance of the blasting machines. Air treatment equipment includes an air cooler/dryer system with coalescing and particulate filters. To dry and clean the air entering our vacuum blasting equipment, we offer four sizes of air cooler/dryer units. |
|
|
|
|
Dimensions
Weight
Desiccant |
48" W x 72" D x 65" H
1235 lbs. empty
1950 lbs. full
715 lbs. |
| |
|
|
|
|
|
Quickly cools air and removes moisture
Each Cooler/Dryer package includes five components: air cooler, water trap, coalescing filter, single-tower dryer, and a particulate filter
4 skid mounted Air Cooler/Dryer Units of appropriate capacity to choose from
All dryer vessels are manufactured in accordance with ASME Code, Section Vii, and are stamped and certified. |
|
Air leaving the compressor is hot, moisture saturated and most likely contains oil and solid particles. AES Air Cooler / Dryer Units provide treatment of compressed air prior to its delivery to the Vacuum Blasting machine. The package comprises in-line; a coalescing filter for the removal of contaminants such as oil; an air cooler heat exchanger with an air driven fan; a water trap; a single-tower deliquescent dryer; and a particulate filter. |
|
