RADeCO Model 210B

Radeco Model 210B

“The Industry Standard In Air Sampling”

The Model 210B not only has two sets of louvers on each of four sides so that air may enter the weather house from any direction, but each set of louvers is uniquely counter-louvered to prevent rain or snow from blowing onto the instrumentation in the weather house. Each end also has upper louvers to prevent heat build-up under the roof.

To permit ease of installation, and electrical box is firmly mounted inside on one wall in the upper part of the house . Electrical conduit from the bottom of the house to the electrical box requires only wire installation and the wiring of the box. A standard light socket is provided so that a “heat lamp”

Access doors, mounted on heavy duty piano hinges are provided on both sides for ease of instrument installation and maintenance. Each door opens 180° and is held closed by putting a lock through the hasp.
Material—House: 90 mil aluminum; finished with cromate primer and white Aero Plate porcelain enamel.
Material—Legs: 24” Long x 1 1/2” x 1 1/4” aluminum angle legs have mounting pads making the unit easily attached to any mounting base.
Access Openings: One on each long side—14” x 26” free space; piano hinged doors: twist locks for closure with hasp for security.
Electrical Fitting: Four position electrical box ready for wiring. Standard light bulb socket for light or for heat lamp during extremely cold weather.

Specifications
Overall Dimensions 48” high x 24” deep x 30” wide
Weight 52 pounds
For Larger Weather House Model 220B
Overall Dimensions 36” x 30” x 63” tall
Legs 36” long x 2” x 2”
Openings 17” x 32”