Double Coated Tapes


Double Coated Tapes


#FS469 Double Coated Transfer Tapes This stabilized acrylic transfer film has an easy release liner for ease of application. Product exhibits very high quick stick and holding power at elevated oven temperatures. TYPICAL APPLICATIONS: #FS469 is recommended for mounting nameplates, flying splices, envelope closure and also static splicing, i.e. paper-to-paper, film-to-film and cloth to cloth.

#FS454 Double Coated Polyester Tapes Available with either a permanent pressure sensitive rubber-based adhesive or an aggressive permanent acrylic adhesive bonded to a polyester carrier, #FS454 is self wound on a coated, two sided, densified kraft release liner. The polyester carrier (.5 Mil) is coated with (1.25 mil) of adhesive on each side. TYPICAL APPLICATIONS: rubber- based adhesive is recommended for bonding to urethane foam, closed cell, sponge rubber, polyethylene foam, cork and felt; acrylic adhesive is recommended for laminating to a wide variety of materials and is preferred for die cut processing.

#FS991 Double Coated Polyethylene Foam Tapes A double-coated polyethylene foam tape consisting of a high performance rubber based adhesive with good adhesion to a wide variety of surfaces, (including irregular surfaces), #991 provides excellent tack, peel and holding power. TYPICAL APPLICATIONS: #FS991 is recommended for general mounting of mirrors, soap dispensers, hooks, etc. also, gasketing and splicing. Sound deadening.

#FS441B Double Coated Paper Tapes This impregnated crepe paper is coated on both sides with a synthetic based adhesive that exhibits ultra high tack and moderate dead load properties. it is supplied on a standard 60# silicone treated release paper. TYPICAL APPUCATIONS: #FS441 is recommended for splicing, laminating, joining, packaging and holding.

#FS451 Double Coated Vinyl Tapes This polyethylene carrier supports a high tack rubber base adhesive which bonds to a wide variety of substrates. The release liner has low release values for easy removal. TYPICAL APPLICATIONS: #FS451 is widely used in the carpet industry for securing carpeting and tiles. Also recommended for laminating and splicing plates.

#FS440 Double Coated Cloth Tapes The cotton cloth backing on this tape withstands tension and accommodates irregular surfaces. Its reclaim rubber adhesive bonds immediately and retains bond integrity. TYPICAL APPLICATIONS: #FS440 is recommended for carpet installation on interior floors and stairs of commercial aircraft, with multi-purpose use in industrial mounting and holding. #FS464 Double Coated Tissue Tapes A lightweight double coated tissue with pressure sensitive rubber adhesive coated on each side, is recommended for mounting nameplates, laminating cork, paper, textile, and plastic.