|
|
|
|
Vinyl Tapes
|
| |
|
|
|
#FS331 Electrical Tapes
"APE TAPE" brand is U.L. approved and constructed of a suitably plasticized and stabilized soft film of polyvinyl chloride or copolymers, coated with a rubber- based adhesive on one side. The non-corrosive pressure-sensitive adhesive requires no heat, moisture, or other preparation and results in an easily applied quality finished application.
#FS305 Vinyl Tapes
This colored OSHA-approved vinyl tape is a stabilized, plasticized PVC film, coated with a non-corrosive pressure-sensitive adhesive. it has excellent resistance to moisture, acids, chemicals, alkalies, oils, abrasion and weathering. TYPICAL APPLICATIONS: #FS305 is recommended for floor or aisle marking in conformance with OSHA requirements, but may be used anywhere durable marking or color-coding is desired.
#FS333 Colored Electrical Tapes
Our "APE TAPE" 6 mil. value-priced electrical tapes consist of stabilized, plasticized, polyvinyl chloride film coated with a non-corrosive pressure-sensitive adhesive. Commonly used to electrically insulate joints and splices in wires and cables, "APE TAPE" brand colored electrical tapes can also be used to identify container contents, mark pipes and conduit systems, or as a warning tape. OTHER TYPICAL APPLICATIONS: Used to identify electric phases, circuits, feeders, and branches.
|
|
|
| |
#FS7520 Pipewrap Tapes
"APE TAPE" brand of high-performance pipe wraps composed of a stabilized, plasticized PVC film coated with a non-corrosive pressure-sensitive adhesive. #FS7520 is both moisture resistant and anti corrosive. It has outstanding conformability and adhesion to metal and plastic.
|
|
|
| |
|
#FS350 Hazard Stripe OSHA Vinyl Tapes
A PVC tape with an excellent abrasion resistance to acid, alkalies and oils, #FS350 is easily applied and economical to use. TYPICAL APPUCANONS: #FS350 is recommended for marking obstructions, handrails, steps, passageways and hazardous areas, lane marking, color-coding, sealing, bundling and identification. |
|
|
| |
|
#FS333P Domestic Electrical Tapes
This 7 mil. U.L. approved pressure sensitive tape is highly resistant to cold weather, sun, water, oil, acids, alkalies and corrosive chemicals. TYPICAL APPIICATIONS: 333P is recommended as a primary insulation for splices at not more than 600 volts where low temperature application is desired.
#FS336 8.5 mil Electrical Tapes
This all weather insulating tape is especially suited for high performance cold weather applications, is flame retardant, and has a high resistance to abrasion. For outdoor wiring and splicing, you won't find a tape with better conformability and high adhesion, yet an easy unwind. |
|
|
| |
|
#FS307 Electroplating Tapes
This vinyl tape provides excellent resistance to solvents, moisture and abrasions. TYPICAL APPLICATIONS: #FS307 is recommended for masking metal during electroplating and acid etch dip processes. |
|
|
|
|
|
© 2008 Frham Safety Products, Inc.
|
|
|
|
