Whirl Pak Dosimeter Bag and Nuclear Sampling

WHIRL-PAK Liguid/Sludge Sampling Continued Page 2

FSB1355WA - Sludge Judge II. Sh. wt 3.38 lbs., 1.60

FSB1356WA - 5 ft., 1.53 m Bottom Section. Sh. wt. 1.25 lbs., 0.60 kg.

FSB1357WA - 5 ft., 1.53 m Extenson Section. Sh. wt. 1.25 lbs., 0.60 kg.

FSB1358WA - 5 ft., 1.53 m Top Section. Sh. wt. 1.38 lbs., 0.70 kg.

FS01361WA - 6 ft., 1.83 m Cleaning Brush. Sh. wt. 1.25 lbs., 0.57 kg.

FSB01414WA - 3" x 12", 7.6 x 30.5 cm, Sh. wt. 0.56 lbs., 0.26 kg.

The Sludge Judge II is mad from a 1 1/4", 3.18 cm outisde diameter plastic tubing resulting in double the capacity and a very rigid unit when assembled. It holds 6 oz. per foot, 178 ml/3.1 m and can be assembled according to the requirements of the job. Add or subtract sections as needed, and the 1-ft., .31 m markers on the tubing will help identifiy both the depth of the tank and the amount of sludge on the bottom. The unit is made up of three 5-ft., 1.53 m sections (top, extension, bottom) or individual sections can be combined as required. Cleaning brush listed below and carrying case shown on continued page 3 can be used with this unit. This way the cleaning rod, aslo shown on continued page 3, and cotton strips listed below are designed for cleaning greasy/oily residue from inside the tubing.

FSB01386WA - Sludge Judge Ultra Sh. wt. 3.13 lbs., 1.9 cm.

FSB01387WA - 5 ft., 1.53 m. Top Section. Sh. wt. 1.25 lbs., 0.57 kg.

FSB01388WA - 5 ft., 1.53 m. Extension Section. Sh. wt. 1.38 lbs., 0.63 kg.

FSB01389WA - 5 ft., 1.53 m. Bottom Section. Sh. wt. 1.38 lbs., 0.63 kg.

For maximum strength and rigidity - use the Sludge Judge Ultra ! It is constructed of extremely strong polycarbonate and treated with an ultraviolet stabilizer to help reduce deterioration from the sun's harmfum rays. The material is very rigid, minimizing bending of the unit when it is full of water or other liquids. Durable in cold temperatures; can withstand heat up to 280° F, 138° C (with careful handling). The 3/4", .31 m measurements on the tubing. Unit is made up of three 5-ft., 1.53-m sections (top, extension, bottom). Individual sections can be combined as required. The carrying case, cleaning brush, cleaning rod and cotton strips shown on continued page 3 can be used with this unit.

Settleometer Kit
This kit is designed to measure sludge settling characteristics. It includes a clear plastic settleometer, wide mixing paddle, snap-on lid, and complete instructions. Calibrated in percent and settled sludge volume (SSV). Bright, white markings contrast vividly with dark sludges, allowing easy-to-read interface. Yeilds information which closely approximates settling in secondary clarifiers and aerobic digesters. Sh. wt. 1.06 lbs., 0.49 kg.

FSB01173WA